Chlorine and chloramine in tap water
The federal limit, which disinfectant each city reports, and the filter claims to look for.
Utilities add a disinfectant so water stays safe on its way through the pipes. The reports we cover list chlorine or chloramines, and EPA caps both at the same residual level: an MRDL of 4.0 mg/L, measured as Cl2 (EPA, National Primary Drinking Water Regulations, checked Nov 20, 2026).
EPA says many systems use chlorine as the primary disinfectant, and that some changed their secondary disinfectant to chloramines “to meet disinfection byproduct requirements” (EPA, Chloramines in Drinking Water, checked Nov 20, 2026). Our disinfection byproducts page covers TTHM and HAA5.
| Disinfectant | MRDL (enforceable) | MRDLG (goal) | What EPA lists above the MRDL |
|---|---|---|---|
| Chlorine (as Cl2) | 4.0 mg/L | 4 mg/L | “Eye/nose irritation; stomach discomfort” |
| Chloramines (as Cl2) | 4.0 mg/L | 4 mg/L | “Eye/nose irritation; stomach discomfort, anemia” |
What our 6 cities reported
| City | Item | Reported value | Range | Limit shown in the report | Checked |
|---|---|---|---|---|---|
| New York City | Free chlorine residual | 0.6 mg/L (average) | ND – 1.4 mg/L | MRDL 4 mg/L | Nov 19, 2026 |
| Phoenix | Chlorine (disinfectant) | 0.84 ppm (highest RAA) | <0.24 – 1.9 ppm | MRDL 4 ppm | Nov 19, 2026 |
| Chicago | Chlorine (as Cl2, disinfectant) | 1 ppm (highest) | 0 – 1 ppm | MRDL 4.0 ppm | Nov 20, 2026 |
| Philadelphia | Chloramine (disinfectant) | Listed as “Total Chlorine Residual” | See report table | MRDL 4 ppm | Nov 19, 2026 |
| Houston | Chloramines (disinfectant) | 2.8 ppm (average) | 0.04 – 4.8 ppm | MRDL 4.0 ppm | Nov 19, 2026 |
| Dallas | Total chlorine residual (disinfectant) | 2.97 ppm (annual average) | 2.75 – 3.18 ppm | MRDL 4 ppm | Nov 20, 2026 |
Values are system-wide figures, and the statistic differs by report (average, highest running annual average or highest single result), as labeled. Dallas lists only a “total chlorine residual” and doesn’t say whether that is free chlorine or chloramine.
What these numbers can and cannot tell you
A system-wide figure is not a test of your tap. If you need to know which disinfectant reaches your tap, ask your utility; for health questions, talk to your doctor.
Filters and the disinfectant
NSF’s listing search shows “Chlorine Reduction” under NSF/ANSI 42 and 53, “Chloramine Reduction” under NSF/ANSI 42, and “Free Available Chlorine Reduction” under NSF/ANSI 177 (NSF listings, checked Nov 20, 2026). Match the claim to what your report says your city uses. Our filter guide compares filter types.
Questions
What is the limit for chlorine in tap water?
EPA’s regulations table lists a maximum residual disinfectant level (MRDL) of 4.0 mg/L for chlorine and for chloramines, both measured “as Cl2,” with a goal (MRDLG) of 4 mg/L (EPA, checked Nov 20, 2026).
What are chloramines?
EPA says chloramines “are most commonly formed when ammonia is added to chlorine to treat drinking water” and “provide longer-lasting disinfection as the water moves through pipes to consumers.” It says they have been used since the 1930s and that “more than one in five Americans uses drinking water treated with chloramines” (EPA, checked Nov 20, 2026).
Is chloraminated water safe to drink?
EPA says water that contains chloramines and meets its standards “is safe to use for” drinking, cooking, bathing and other household uses (EPA, checked Nov 20, 2026). We do not give health advice; for health questions, talk to your doctor.
How do I know which one my city uses?
Check your utility’s water quality report. Of the six reports we cover, New York City, Phoenix and Chicago list chlorine; Houston lists chloramines, and our Philadelphia page shows chloramine under the report’s “Total Chlorine Residual” heading; Dallas lists a total chlorine residual without saying which. Each row is shown as printed.
Which filters are certified for chlorine or chloramine?
In NSF’s listing search, “Chlorine Reduction” appears under NSF/ANSI 42 and 53, and “Chloramine Reduction” under NSF/ANSI 42 (NSF listings, checked Nov 20, 2026). They are separate claims, so a filter listed for chlorine is not automatically listed for chloramine.
Sources
- EPA: National Primary Drinking Water Regulations (last updated Aug 31, 2026) (epa.gov, checked Nov 20, 2026)
- EPA: Chloramines in Drinking Water (last updated Mar 12, 2026) (epa.gov, checked Nov 20, 2026)
- NSF certified drinking water treatment units (listing search) (info.nsf.org, checked Nov 20, 2026)
- 2025 Drinking Water Supply and Quality Report, New York City (nyc.gov, checked Nov 19, 2026)
- 2025 Drinking Water Quality Report, Philadelphia (water.phila.gov, checked Nov 19, 2026)
- 2025 Water Quality Report, Phoenix (phoenix.gov, checked Nov 19, 2026)
- 2025 Water Quality Report (Jan–Dec 2025), Houston (houstonpublicworks.org, checked Nov 19, 2026)
- 2025 Chicago Water Quality Report, Chicago (chicagoccr.org, checked Nov 20, 2026)
- 2025 Water Quality Report, Dallas (dallascityhall.com, checked Nov 20, 2026)